AC Compressor for Thermo King Tripac APU 75R86132Q

Description

The AC compressor pumps refrigerant in a repeating cycle through the AC system. As the refrigerant is pumped, compressor oil also travels with the refrigerant. The AC compressor is one of the few components in an AC system that has any moving parts to wear. In general, new compressors contain a correct charge of oil for your system, but re-manufactured compressors may only contain trace amounts of oil and need additional oil at time of installation. We only sell new compressors, so there is no need to add oil. Always replace the receiver/drier when replacing a compressor.
This AC compressor is used in Thermo King Tripac APU systems. Alternate part number 75R86132A is also available for this application.
Manufacturer: Que
Type: Seltec-Valeo
Model: QP15HD
Pulley Type: Poly 8
Pulley Diameter: 123 mm
Clutch Voltage: 12 vdc
Wires: 1
Mount Type: Ear
Head: C
Suction Fitting: #10 7/8-14
Discharge Fitting: #8 3/4-16
Interchange Numbers:
2521266
488-45122
1021004
Thermo King Tripac
102-1004
Thermo King Tripac
102580
Thermo King Tripac
102-580
Thermo King Tripac
103-55122
20-10260
20-10260-HP
5783
QP15-1266
102-1018
75R86132A
All of our new Compressors contain a correct charge of oil for your R-134A AC System. There is no need to add additional oil.
Manufacturer recommendations are to always replace the filter/drier/receiver when replacing a failed compressor. Compressor warranty claim require proof the drier has been replaced and the A/C system has been flushed when the new compressor was installed.